CN
EN
Product Overview
ADM16F03A1Q
ADM16F03A1Q is a high-performance SoC designed for automotive applications, with a clock frequency of up to 150MHz. It integrates an operational accelerator, operational amplifier, comparator, ADC, PWM controller, communication peripherals, pre driver, and LDO, and is powered directly by 12V; AEC-Q100 certification; Support multiple motor drives
Datasheet →Automotive Standard
Product Features
● Single power supply
-4.5V~40V
- Integrated LDO (pre drive 12V, core 1.2V, digital IO port 5V, analog 3V)
● High performance 16 bit fixed-point DSP core tag12
- Maximum clock frequency of 150MHz
- Harvard bus structure
- Fast interrupt response and processing
● on-chip memory resources
-4K x 16 bit SARAM
15} - (256+256+32) x 16 bits DARAM
-32K x 16 bit Flash
● Operation acceleration unit
-32-bit multiply add and shift
● 17 general-purpose I/O pins
● Event Manager EM1
-4 16 bit timing/counters
-8 PWM outputs (PWM) 1-6 form three complementary outputs, PWM7/8 independent output)
-1 set of orthogonal encoding units
-3 capture units (CAP1/2/3)
- configurable PWM cycle interrupt generation and ADC sampling trigger timing
● integrated three-phase high and low side half bridge drive circuit
- six channel NMOS Pre Driver
- The high side floating absolute voltage of the gate drive circuit can reach 200V
- The driving capability IO+/IO -:+1.2A/2.0A VDRV=12V, VBS=12V
● ADC
-12 bits, conversion rate 1 MSPS
– 16 Channel, connected to on-chip temperature sensors
- Channel sorter, can set ADC sampling channel sequence
● Operational amplifier
-1 OP, can be used for bus current signal conditioning
-3 PGAs, can be used for phase current signal conditioning
} ● Voltage comparator tag12
-3 voltage comparators, shared reference terminal, can be used for BEMF comparison detection
-2 voltage comparators with reference voltage (generated by DAC), can be used to protect
● Interrupt
-2 External interrupts
-29 external interrupts set by PIE
● Digital delay filtering
- 3 Group independent configuration delay filtering units correspond to external interrupts, power protection, and CAP1/2/3
● Serial communication peripherals
- SCI
● Clock
-10M on-chip oscillator
- PLL multiplication coefficient 1x~15x
● Supports WDT
● Supports 4-wire fast program burning
● Supports JTAG online simulation
- Analysis and breakpoint functions
- Hardware based real-time debugging
● ESD Grade (HBM): 2000V
● Temperature range: -40 ° C~125 ° C (via AEC-Q100)
● Junction temperature: -40 ° C~150 ° C
● tag15} - LQFP48 package
- QFN48 package
-4.5V~40V
- Integrated LDO (pre drive 12V, core 1.2V, digital IO port 5V, analog 3V)
● High performance 16 bit fixed-point DSP core tag12
- Maximum clock frequency of 150MHz
- Harvard bus structure
- Fast interrupt response and processing
● on-chip memory resources
-4K x 16 bit SARAM
15} - (256+256+32) x 16 bits DARAM
-32K x 16 bit Flash
● Operation acceleration unit
- Division, square root
- arctangent - Parker Transform-32-bit multiply add and shift
● 17 general-purpose I/O pins
● Event Manager EM1
-4 16 bit timing/counters
-8 PWM outputs (PWM) 1-6 form three complementary outputs, PWM7/8 independent output)
-1 set of orthogonal encoding units
-3 capture units (CAP1/2/3)
- configurable PWM cycle interrupt generation and ADC sampling trigger timing
● integrated three-phase high and low side half bridge drive circuit
- six channel NMOS Pre Driver
- The high side floating absolute voltage of the gate drive circuit can reach 200V
- The driving capability IO+/IO -:+1.2A/2.0A VDRV=12V, VBS=12V
● ADC
-12 bits, conversion rate 1 MSPS
– 16 Channel, connected to on-chip temperature sensors
- Channel sorter, can set ADC sampling channel sequence
● Operational amplifier
-1 OP, can be used for bus current signal conditioning
-3 PGAs, can be used for phase current signal conditioning
} ● Voltage comparator tag12
-3 voltage comparators, shared reference terminal, can be used for BEMF comparison detection
-2 voltage comparators with reference voltage (generated by DAC), can be used to protect
● Interrupt
-2 External interrupts
-29 external interrupts set by PIE
● Digital delay filtering
- 3 Group independent configuration delay filtering units correspond to external interrupts, power protection, and CAP1/2/3
● Serial communication peripherals
- SCI
● Clock
-10M on-chip oscillator
- PLL multiplication coefficient 1x~15x
● Supports WDT
● Supports 4-wire fast program burning
● Supports JTAG online simulation
- Analysis and breakpoint functions
- Hardware based real-time debugging
● ESD Grade (HBM): 2000V
● Temperature range: -40 ° C~125 ° C (via AEC-Q100)
● Junction temperature: -40 ° C~150 ° C
● tag15} - LQFP48 package
- QFN48 package
