The ADM32F036Q motor drive DEMO board is a motor development platform based on the ADM32F036QN56Q chip, which can meet the needs of users for inductive FOC (single and double resistors) and inductive square wave debugging. The onboard LIN transceiver and CAN transceiver can achieve LIN and CAN communication, and can also control the 12V LDO power supply of the CAN chip through its wake-up function to achieve sleep and wake-up of the DEMO board power system.

● Main architecture 32-bit fixed-point DSP
● Main frequency 100MHz
● Storage resources 18K x 16 bit SARAM 64K x 16 bit Flash
● Communication interfaces CAN (CANFD), SPI, SCI, LIN, IIC
9} ● Analog peripheral 1OP+3PGA+3 comparator (internal DAC voltage reference, output associated TZ)+temperature sensor
● Integrated configuration 5V-LDO, 12V-LDO, 6NMOS pre drive
● Power input 12-24V
● Main control chip ADM32F036QN56Q
● Communication interface LIN communication, SPI communication, SCI communication, CAN communication
● Drive mode Non inductive FOC (single/double resistor), Non inductive Square wave